Baseplate 30 x 30 cm

Baseplate 30 x 30 cm

Are you planning to build a truss construction which stands on legs? Then the use of baseplates is inevitable. Just placing truss sections on the floor is not allowed. The truss vertical would get damaged  and the load is not equally distributed.

Application Baseplate

By placing a truss construction, all the load is carried through the vertical truss sections. These 'legs' keep the construction on the right height. To distribute the load evenly over the main tubes of the truss sections, a baseplate is needed. These baseplates have the same width and depth as a truss section. Extra space on the floor is thus not needed. These compact baseplates are equipped with CCS6-648 conical couplers and can be directly mounted to truss sections. The only thing needed are 4 conical pins and springs. Do bear in mind that connecting these Prolyte baseplates is only possible to Prolyte H30V or X30 series. Connecting a baseplate to other brands or types of truss is not possible. Are you not only looking for a baseplate for load distribution but also to increase the footprint and stability? Check out our baseplate of 55 x 55 cm or the ballast block of 450 KG.

Technische specificaties

• Brand

  Prolyte

• Model

  H30V Baseplate Small

• Colour

  Aluminium

• Coupling system

  CCS6-649

• Max carry weight

  See supplier's table

• Weight

  1.68 KG

• Dimensions

  300 x 300 mm (L x W)

Tips

Video